The Dos and Don’ts of Basement Waterproofing

What Are Do’s And Don’ts of Basement Waterproofing?

Since they are constructed below grade, basements are prone to flooding. In most cases, homeowners notice wetness on the walls of their basements and this usually happens from time to time. However, it is more frequent during the winter and the worst happens when the basement floods when the rain falls. Wet basement can result to a lot health issues due to growth of mould and mildew if you have wooden furniture they can also start to rot and there could be also damage inflicted on stored items. That is the reason basement waterproofing is essential in every home.

Though builders do the necessary things to waterproof the basement, with time as the house settles, there are some cracks that develop in the basement walls. When the soil surround the foundation of your home get saturated especially during the rainy season, it finds way into your basement through these cracks and fault lines. Remember that, even the strongest basemen can absorb water from the underground and end up into your basement. This water makes the walls damp. Depending on the cause of wetness in your basement, you can fix it. However, wet basement is a significant issue and you would want to hire a professional basement waterproofing expert to do the job for you.

1. Determine The Source Of The Water

Basement waterproofing results from concrete being porous and that will help you determine the source of the water. Water can seep into your house through cracks along the wall, corners of a window and motor joints. Check around the pipe especially on the parts that enter the house or the exit either through the water supply or a sewer pipe.

With an entire wet wall, you might have to sleuth further by doing a condensation test by drying one part of the wall then attaching a piece of aluminium with duct tape. If the aluminium foil gets wet after some time, then water could be seeping from the wall.

2. Repair Walls When The Basement Is Dry

Water can seep through the cracks on the wall during the rainy season when repairing cracks on the wall ensure that you remove water from the floor when conducting basement waterproofing. Working on a wet floor might lead to electric shock. In case you notice that the floor is a wet turn off all the electric sources. But with little effort, you can make the basement dry, then proceed by inspecting, fixing and waterproofing the basement after that.

3. Fill Cracks With Hydraulic Cement

Cold joints are created when the floor and the walls are being constructed, and these joints sometimes form cracks from the basement due to lateral pressure from the soil. If water seeps from the cracks, you can fill them with hydraulic cement which is a mixture of additives that makes the cement expand rapidly and settle well. The hydraulic cement mixture can form a watertight bond that blocks water from entering through the cracks.

4. Address Window Leaks Well

Window wells can collect forming water pools which can eventually lead to leaks in the basement. Installing a window drainage system is difficult but one can dig lower drainage around the house and filling it with gravel that will help the water to distribute evenly in the soil. Sometimes you might need to caulk the window area with appropriate masonry caulk. Moreover, you may choose to install a sloped window that can direct the rainwater away from the house for effective basement waterproofing Toronto.

5. Apply Brickwork Waterproofing Products To Bare Internal Walls

If using a foil test, you realize that the water on your basement originates from the wall, then you might consider painting your walls with high-quality paint. Some sealant comes when they are mixed already and can be painted on the walls directly just like a coat of paint. Use a paintbrush or a roller to waterproof a house. The sealant itself will form a watertight layer on the wall, thus preventing any moisture in your basement.

6. Sealer Should Not Be Applied On Effloresce Or Painted Walls

Remove any paint on the wall left behind by the previous homeowner before applying a basement waterproofing Toronto You can use sandblaster or a wire brush; although it is a tedious job, it leaves your basement clean and ready for waterproofing. Paint reduces the efficiency of the waterproof coat thus the need to remove it completely.

The do’s and don’ts of getting your first VPN

Virtual private networks, or VPNs, have been a hot topic for some time. Rising rapidly from the realms of techie insider tip to mainstream online privacy tool, VPNs are now being adopted by everyone, from expats and students to concerned parents and businesspeople.

For the uninitiated, the key selling points of using a VPN are that it secures your online activities – acting as a shield against hackers and targeted ads – and that it allows you to browse the web as if you’re in another location. Hiding your device’s unique IP address, VPN services allow you to connect to websites and streaming services through their own server networks in other parts of the world.

As well as preventing activity tracking and covering your personal data with a layer of encryption, VPNs enable an increasingly mobile society to connect to geo-locked content regardless of where they might actually be. Naturally VPN services are keen to emphasise that their use should be defense against hackers and online identity theft first and foremost, but regardless of your particular priority, there are certain things to look for and things to avoid when you’re shopping for your first VPN.

A multi-purpose app

Realistically, your very first VPN is not going to be a custom-built network that you created yourself. There are plenty of choices when it comes to simply downloading a VPN app, and ideally you want one where a single subscription can be used across all of your devices. If you’re likely to log on via a smartphone, tablet and a computer for example, ensure you find an app that will work just as well on all three and which allows multiple connections to be made at once.

You should also be certain that any VPN you go for is compatible with your existing operating systems. Many VPNs support multiple platforms, but some are limited to iOS or Android only, meaning they won’t work with anything else.

Look for a kill switch

It sounds like something you might find in a sci-fi movie, but a kill switch feature is important both for the security-conscious and for users who are really only focused on their international streaming options.

When you’re using a VPN, your anonymity and your ability to connect through a server in the USA or Thailand are reliant on your IP address being masked, and replaced with that of one of the VPN provider’s servers. The security of your personal data is also only guaranteed when the VPN connection is active, putting in place a layer of end-to-end encryption. If your VPN connection cuts out for any reason, the encryption goes with it and your real IP address can be exposed.

A drop can be over so quickly that you might not even know it happened, but that’s still enough time to compromise your data. If you’re using streaming services, it’s also enough for the service provider to realise you aren’t located in the place that they thought you were.

The purpose of a kill switch is to ensure that if your VPN connection drops, your whole internet connection is taken offline. That means you might have to restart your TV show or re-enter your payment details, but in either case, your details haven’t been inadvertently exposed. Not all VPNs come with a kill switch function, but it’s worth shopping around for.

Consider the range of server locations

Some VPN apps offer hundreds of server locations that you can switch between, while others have only a few dozen. If you’re not too bothered about watching content from a lot of other countries or shopping around for region-restricted deals, that might not seem like a high priority. But the more servers that are available, the faster the connection you may be able to obtain.

Generally speaking, free apps and free versions of paid apps will give you access to fewer servers than a proper subscription service.

Fewer server locations means more people sharing each one, which can result in slow upload and download speeds. There’s also a higher risk that the connection will suffer drops. A wider choice of servers near to your real location is also useful, because using a nearby server also tends to speed up your browsing.

Check user reviews and logging policies

There is a risk that some apps you come across during your research are fraudulent or malicious, simply malware or spyware disguised as a legitimate service. ‘Free’ services can also be rife with data-logging concerns, and even genuine apps have been caught out storing detailed data on their users’ browsing habits and selling it to advertisers – precisely the sort of thing people use a VPN to avoid.

Before downloading a new app to your device, give the user reviews a thorough read-through and check the small print in their data logging policies. Does the app make it easy to contact customer support if you need assistance? Are people having good experiences? Most importantly, what kind of logging does the service carry out?

Most apps will log some kind of data, because they’re legally required to. Simple details like the amount of bandwidth you used or how long you were logged on for are not cause for alarm, but if you notice that a provider logs information on the websites you visit, you should think twice before downloading their service.

Whether you’re most keen to evade hackers or just want to stream your favourite TV shows while you’re on a trip, finding a good quality app with a range of server locations and a kill switch function is key.